Fitting Underfloor Heating Into A Carpeted Room

  • The first room we fitted with underfloor heating was the carpeted living room. I measured the room carefully and deducted a further 5% of the total room measurement for the perimeter allowance. I informed the underfloor heating company of the room measurements to ensure I bought the correct amount of underfloor cable mats. They were really helpful, gave me lots of advice, and reminded me I could cut the matting to size,Still searching for Oil well heat tracing exporters? Oil well heat tracing exportersOur company always offer crude oil terminal heat tracing selling leads, just welcome and visi? but I must not cut the cables that ran within the mats. 

    There were some basic floor preparations we had to do before we started to lay the underfloor heating: remove the carpet, check the subfloor was structurally sound and secure with no movement. Tighten any loose floorboards and ensure the floor was free from dust and debris so there wasn't anything to protrude into the insulation and the cable heating mats. 

    Next,Our company has electric heating mat for sale,electric heating mat and these floor heating mat are from China with high quality and exported to the foreign countries. we laid insulation tiles over the whole floor, so heat generated from the underfloor heating system was not lost into the subfloor; it would improve the performance of the underfloor heating system and reduce electricity costs. We laid the insulation without any problems and the next step was to position the floor sensor and thermostat.As one of the best Single conductor heating cables sellers in China, Single conductor heating cables sellerswe own the advanced Single conductor heating cables manufacturing technology and have won reputation The thermostat was located near the electricity supply within the room, and I carefully cut a channel in the thermal insulation board approximately 10 mm x 10 mm deep, and 300 mm long for the floor probe conduit. 

    We put carpet gripper rods around the edges of the room, about 40 mm from the wall, and placed the underfloor heating cable mats between the gripper rods, ensuring the cable heating mats did not overlap. We were keeping the open fireplace in the living room because my wife and I felt it added character to the room; so we had to leave a 200 mm gap around the fireplace to protect the heating cable mats from the direct heat of the fire. We used double-sided sticky tape to secure the underfloor heating cable mats to the insulation, taking care not to drop any sharp edged tools on the underfloor heating cable mats, and we tried to walk on the cable mats as little as possible so we didn't damage them. I have kept a note about the exact location of the heating cable mats, for future reference. 

    When the installation of the underfloor heating was complete, we were ready to lay the carpet and underlay that was suitable with underfloor heating, and get a qualified electrician to connect the underfloor heating system to the electricity, When my wife and I bought our house this year,Still searching for Flue gas desulfurization exporters? Flue gas denitration selling leadsOur company always offer Flue gas denitration selling leads, just welcome and visi? I decided to replace the old heating system with electric underfloor heating. The previous owners had told me the boiler was old and temperamental, and the ceiling showed scars from previous leaks,Are you still searching for Heating cables manufacturers or Heating mats exporters? Heating cables manufacturersWe provide China's best MI cables for customers all over the world. so I decided to look into different types of heating systems.