Prior to laying: Preferably to be used on a hard sub-grade. in case of use directly on garden soil always place paving stones underneath the rails to create an extra strong foundation (see image 1).american wood fibers wood plastic composite in that case level the ground first and remove possible weeds and use a black anti-weed membrane to prevent as much as possible weeds from growing. Keep a minimum gap of 30 mm between decking / rails and walls or other obstacles. in order to absorb the longitudinal effect of the WPC decking by influence of temperature changes,[url=http://www.woodfloorprice.com/wood-floor-solution/553.html]composite wood porch floor[/url] please keep an opening of about 10 mm between the crosscut faces in case of use of several sections of decking in the longitudinal direction of the terrace. Use a fine-toothed saw for cutting the material to size. Lay the rails (base structure) flat and level (see image 6), at a maximum interval of 40 cm. Place a finishing profile (A-vertical) against the head of the rails (Ahorizontal), see image 2. Cut this finishing profile with a false mitre. Note: follow the drawing (see images 7 and 8), so that the finishing profile connects with the so-called crosscut face later.This too must be done exactly according to the drawing (see images 7 and 8) Now install the first section of decking (B).lightweight ceiling applications Make sure that the tongue of the finishing profile and the groove of the decking interlock and connect correctly. Now screw the finishing profile to the decking into the marked vgrooves every other 40 cm, using the enclosed long screws. Beware of the power of your electric screwdriver (see image 3). TiP: FOR ADDiTiONALSTABiLiTy,ThE hORizONTALRAiLS CAN BE SCREWED ONTO ThE VERTiCAL FiNiShiNg PROFiLE USiNg ANgLE iRONS (SEE iMAgE 9)
