Kitchen faucets manufacturers introduce tips for installing fau
-
The faucet is made up of a variety of materials, and stainless steel faucets are one of them. Let's take a look at the stainless steel faucet installation techniques with the kitchen faucets manufacturers .
1. The working water pressure of the faucet is 0.05-1.0MPa, and the applicable water temperature is 4°C-90°C. Therefore, it is necessary to ensure that the domestic water pressure is within the required range during installation, otherwise the faucet will not be able to supply water normally.
2. The main body of the faucet has been commissioned to the best condition. Do not disassemble it during the installation process, otherwise the sealing performance of the faucet during use will be very poor.
3. After the installation of the faucet is completed, because other decoration links in the home are still in progress, the country is just protecting the faucet, because it needs to be covered with a simple cover, mainly to avoid sticking of other cement slurry, welding slag, etc. Attached, causing the faucet to become spotted or discolored or blocked and cannot be used.
4. Before installing the faucet, be sure to remove the sundries from the water supply pipe, and then connect the faucet water inlet hose to prevent the clogging of the faucet by simple objects. The simple method can open the main gate valve of the domestic water pipe, and let the water flow make a simple flushing of the whole water pipe. Ensure that there are no impurities in the water pipe.
5. During the installation process, the hot and cold water supply pipe must be connected according to the hot and cold water mark of the faucet. Generally, it is cold and hot to the left. Therefore, it must be noted during the installation process, and the two cannot be reversed.