Forums » Off-Topic Discussions

powder coating extrusion

    • 1328 posts
    October 14, 2021 4:51 PM HKT

    Powder coating may be a dry finishing process who has become extremely popular given that its introduction in The united states over in the 1960s. Representing over 15% on the total industrial finishing industry, powder is used with a wide array of solutions. More and more corporations specify powder coatings for just a high-quality, durable finish, counting in maximized production, improved efficiencies, along with simplified environmental compliance. Made use of as functional (protective) in addition to decorative finishes, powder coatings can be purchased in an almost limitless assortment of colors and textures, and technological advancements have generated excellent performance properties.
    Powder coatings are determined by polymer resin systems, put together with curatives, pigments, leveling realtors, flow modifiers, and various other additives. These ingredients usually are melt mixed, cooled, and ground proper uniform powder similar in order to baking flour. A process called electrostatic spray deposition (ESD) is usually used to achieve the required forms of the powder coating to your metal substrate. This application method uses a apply gun, which applies an electrostatic charge towards powder particles, which are then consumed by the grounded part. After application from the powder coating, the components enter a curing oven where, with the addition of heat, the coating chemically reacts to form long molecular chains, creating high cross-link density. These molecular chains are extremely resistant to breakdown. This application is the most typical method of applying powders. Powder coatings can be applied to non-metallic substrates for instance plastics and medium density fiberboard (MDF).
    Sometimes a powder coating is applied throughout a fluidized bed application. Preheated parts are dipped in a hopper of fluidizing powder as well as the coating melts, and flows out on the part. Post cure may be needed subject to the mass and temperature in the part and the kind of powder used. No issue which application process is usually utilized, powder coatings are user-friendly and uncomplicated, environmentally friendly, cost successful, and tough!