Forums » News and Announcements

Stainless Steel Sink Manufacturers

    • 33 posts
    September 2, 2019 8:55 AM HKT

    When purchasing a sink, the depth should be considered first. Some imported sinks are not suitable for large domestic pots, followed by size. There are also measures to prevent moisture at the bottom, and Stainless Steel Sink Manufacturers reminds you of the following points.

    1. The size of the sink is determined according to the size of the countertop, because the sink can be installed on the stage, in the center, and under the stage, so the size is different.

    2. When selecting a stainless steel sink, the material thickness should be moderate. If it is too thin, it will affect the service life and strength of the sink. If it is too thick, it will easily damage the washed tableware. Also depends on the flatness of the stainless steel surface, such as unevenness, indicating poor quality.

    3. Under normal circumstances, the sink with a large cleaning volume is practical, and the depth is about 20 cm, so that the splash can be properly prevented.

    4. The surface treatment of the sink is beautiful and practical with a matte finish. The weld of the sink should be carefully observed. The weld must be even and even without rust.

    5. Beautiful shape, reasonable design, with overflow.

    information about Stainless Steel Sink Manufacturers : https://www.afastainlesskb.com/product/stainless-steel-sink/