Group Info

• Injection Pressure of Air Cooler Mould Hobbies & Crafts
• In the injection moulding process of the Air Cooler Mould(FURNITUREMOULD) https://www.furnituremould.com/ , the hot runner is used in conjunction with the mould and plays a very important role.
  
  High-precision and high-quality products can be easily...  moreIn the injection moulding process of the Air Cooler Mould(FURNITUREMOULD) https://www.furnituremould.com/ , the hot runner is used in conjunction with the mould and plays a very important role.
  
  High-precision and high-quality products can be easily produced by using hot runner. For injection moulding raw materials with poor fluidity, the air cooler mould can obviously improve the fluidity of the raw materials by using hot runner to ensure smooth injection moulding production.
  
  The nozzle tip of hot runner nozzle is easily worn away by glass fiber. After the nozzle tip is worn away, there is too much cold glue in the gate area, so the injection pressure is not enough to rush out, and no glue will come out. So many companies can't get glue out of their hot mouths after using them several times. If the nozzle tip is made of high-speed steel or other materials, the high-speed steel is poor in heat conduction, and the temperature difference between the nozzle tip and the runner is too large, cold material...    less
• • xiu umin (owner)
• • 803 total views
  • 1 total member
  • Last updated February 26, 2020