The best in Belgium.

Occasionally, I may accidentally get the mattress ticking dirty, are there many people who will not be able to start?

The waterproof nylon fabric https://www.wanshiyitex.com/product/nylon-fabric/ is a common and frequently used fabric in shoulder bag customization, among which lightweight shoulder bags are mostly used.

1. Good wear resistance

The wear resistance of...  moreThe waterproof nylon fabric https://www.wanshiyitex.com/product/nylon-fabric/ is a common and frequently used fabric in shoulder bag customization, among which lightweight shoulder bags are mostly used.

1. Good wear resistance

The wear resistance of nylon fabric ranks first, which is many times higher than other fiber fabrics of similar products, so it has excellent durability.

2. Good water resistance

Nylon fabric will not be absorbed when encountering water. When the backpack encounters stains, it is easy to take care of it by wiping it with water. When encountering rainy days, it can protect important items in the backpack and avoid getting wet.

3. Good air permeability

The hygroscopicity of nylon fabric belongs to the middle and upper reaches of synthetic fiber fabric, so the backpack made of nylon will be more comfortable and breathable and reduce the heat of carrying.

4. Good portability

Nylon is a Lightweight Fabric https://www.wanshiyitex.com/ , and the weight of the shoulder bag made...    less

Injection moulding is a very complicated job. Any slight change in the production process may affect the quality of the product. The volume of the plastic in the liquid state is different from that after solidification. Therefore, attention should be...  moreInjection moulding is a very complicated job. Any slight change in the production process may affect the quality of the product. The volume of the plastic in the liquid state is different from that after solidification. Therefore, attention should be paid to the design of the product details. For example, if the design diameter of the product is 5mm at the beginning, the Air Cooler Mould https://www.furnituremould.com/ should be designed according to the volume change that the used production material will shrink or become larger after cooling.

Before injection moulding, strict calculation and testing must be carried out. The air cooler mould cannot be designed just like the volume of the product, thus the product produced is easily unqualified.

In addition to the impact of the material's own characteristics on the products produced, the magnitude of the pressure used in the production process will also have a great impact on the products. If the pressure used is too high, the product may be...    less

1. Lightweight and high strength: Aluminum Corrugated Panel https://www.alubang.net/product/aluminum-corrugated-panel.html is made of high-quality aluminum coiled material with a density of only one-third of that of steel, lightweight and high...  more1. Lightweight and high strength: Aluminum Corrugated Panel https://www.alubang.net/product/aluminum-corrugated-panel.html is made of high-quality aluminum coiled material with a density of only one-third of that of steel, lightweight and high strength.

2. Good weatherability: Aluminum corrugated panel has good corrosion resistance, waterproof, moisture-proof and maintenance-free, and its service life can reach more than ten years.

3. Easy installation: the quality of the aluminum corrugated panel is easy to process, the construction is convenient and quick, and the construction strength is greatly reduced;

4. Decorativeness: Aluminum corrugated panel has a variety of colours and shapes, with beautiful and elegant appearance, bright light aluminum colour and rich colour and anti-fading colour.

5. High recovery value: aluminum corrugated panel is corrosion resistant, and the value of the remelting furnace after recovery is relatively high, with the recovery utilization rate of more than 80%.

Scope of...    less

RO membrane (i.e. reverse osmosis membrane) is the most important Ro Spare Parts https://www.kokoelectric.com/product/ro-system-component/ in the water purification machine. Ordinary tap water must be filtered by the RO membrane to become pure water. As...  moreRO membrane (i.e. reverse osmosis membrane) is the most important Ro Spare Parts https://www.kokoelectric.com/product/ro-system-component/ in the water purification machine. Ordinary tap water must be filtered by the RO membrane to become pure water. As we all know, the RO membrane is consumable, which needs to be replaced once a year or so. Many people will choose to find professional personnel to operate, but in fact, it is not necessary. The film change is actually very simple and we can finish it ourselves.

The first step is to buy an RO membrane. First of all, we need to know the model of the RO membrane in the home water purifier. Take it out of the membrane shell, and if you have the conditions, you can buy a membrane puller on the internet, rotate it gently and pull it out, and look at the model on the label.

If you know the model, you can buy one on Taobao. They are all common. Of course, it is better to buy directly from our equation.

The second step, where to install. The filter element...    less

It has good matching of mechanical properties such as tensile strength, yield strength, section shrinkage, elongation, impact toughness and hardness within the range of the use temperature of the Crate Mould https://www.furnituremould.com/ (room...  moreIt has good matching of mechanical properties such as tensile strength, yield strength, section shrinkage, elongation, impact toughness and hardness within the range of the use temperature of the Crate Mould https://www.furnituremould.com/ (room temperature to high working temperature).

1. Tensile strength and yield strength

Different types of crate mould have a particular emphasis on the specific mechanical properties required for forging plastic crate mould materials. At the same time, the mechanical properties at room temperature should not be considered only while the more important performance indexes at actual working temperature should not be ignored. Do not pursue a comprehensive and high target that is blindly divorced from reality.

2. Impact toughness, section shrinkage and elongation

Since the choice of impact toughness index of forging crate mould material is closely related to the forging load property, if the impact toughness of forging crate mould material is low, the crate mould...    less

With the rapid development of the domestic home textile market, there are higher requirements for the functional types of home textile fabrics. Users are also demanding on Plush Fabric For Home Textiles(WARPKNITTEDFABRIC) ...  moreWith the rapid development of the domestic home textile market, there are higher requirements for the functional types of home textile fabrics. Users are also demanding on Plush Fabric For Home Textiles(WARPKNITTEDFABRIC) https://www.warpknittedfabric.com/product/ : for towels, adults and children must use them every day, so the requirements for water absorption, antibacterial and deodorization of plush fabrics for home textiles are high. For bedding, while pursuing warmth retention, it should not be too heavy. As for curtains, they should not only play a decorative role in the interior, but also have higher requirements for wind resistance and water resistance. For the sand release category, besides the requirements of beautiful appearance and good hand feeling, the plush fabrics for home textiles has good anti-staining and decontamination properties, which is also an important measurement standard.

These performance requirements are very harsh from the perspective of textile technology, and even...    less

Bonded fabric(WANSHIYITEX) https://www.wanshiyitex.com/product/bonded-fabric/ is made of superfine fiber through special textile processing and unique dyeing finishing, and then processed by "bonded" equipment. The bonded fabric uses high technology and...  moreBonded fabric(WANSHIYITEX) https://www.wanshiyitex.com/product/bonded-fabric/ is made of superfine fiber through special textile processing and unique dyeing finishing, and then processed by "bonded" equipment. The bonded fabric uses high technology and new materials of "new synthetic fiber" and has many excellent properties (compared with ordinary synthetic fiber). For example, the fabric is fine, clean, delicate, elegant, warm, full in appearance, windproof, breathable, and has certain waterproof function. Its main characteristics are warmth retention and good air permeability.

Because the bonded fabric adopts superfine fibers, the fabric has very high cleaning capability, namely decontamination capability. The fabric is also characterized by good abrasion resistance, soft hand feeling, air permeability and moisture permeability of superfine fiber fabric, so it has obvious advantages in terms of tactile sensation and physiological comfort, and the crease resistance of superfine fiber fabric is poor...    less

ECCA Wire(XINYU-ENAMELEDWIRE) http://www.xinyu-enameledwire.com/ is a new type of electromagnetic wire using copper-clad aluminum material as an inner conductor. Its characteristics are between copper and aluminum, which combines the excellent...  moreECCA Wire(XINYU-ENAMELEDWIRE) http://www.xinyu-enameledwire.com/ is a new type of electromagnetic wire using copper-clad aluminum material as an inner conductor. Its characteristics are between copper and aluminum, which combines the excellent conductivity of copper with the lightweight of aluminum.

Features of ECCA wire:

1. DC resistivity: The DC resistivity of ECCA wire is about 1.45 times that of pure copper wire; When the resistance values are the same, the weight of copper-clad aluminum wire is about 1/2 of that of pure copper wire.

2. Good solderability: Copper-clad aluminum wire has the same solderability as pure copper wire because its surface is concentrically coated with a layer of pure copper, without special treatment like aluminum wire; At the same time, the copper-clad aluminum wire has a thicker copper layer to ensure that the soldering performance of the product will not be affected when scraping paint.

3. Lightweight: the wire density of copper-clad aluminum is 1/2.5 of that of pure...    less