Recent Entries

• The next step is applying the Hot Melt Glue

  by Lee adhesive December 16, 2016
  The next step is applying the Hot Melt Glue. Ideally, you should complete this step following instructions provided by the manufacturer. The majority of the bonding agents used to attach metal surfaces together should be used outdoors or in well-ventilated areas. This will ensure that one doesn't en...

• Preparing the Hot Melt Film is relatively easy

  by Lee adhesive December 15, 2016
  There are many different Hot Melt Glue on the market that you can choose from when it comes to repairing or fabricating items. One of the more versatile adhesives is known as Polybonder Polyethylene HDPE Adhesive. This works with many different materials including plastics, ceramics and glass. ...

• Help of with Hot Melt Glue

  by Lee adhesive December 14, 2016
  Strapping materials are joined in different ways - after the strap is tensioned the strap is often sealed to itself with the help of melting the plastics together with Hot Melt Glue. Thicker plastics use systems where the plastic material is pressed together in addition to pure heating and literally...

• Might retain a Hot Melt Glue

  by Lee adhesive December 13, 2016
  This is a simple technique which involves chopping the chocolate into pieces and placing them in a microwave safe bowl. Use low power and turn on for 15 seconds and then take out and stir it. Repeat until the chocolate is close to melted. With this method it is hard to see if chocolate is actually m...

• Reduce the amount of Hot Melt Glue used

  by Lee adhesive December 12, 2016
  Reduce the amount of Hot Melt Glue used. Eliminate excessive squeeze out from the adhesive tube or container. Use a clean dry cloth to wipe away any excess. When troubleshooting a bonding problem, the first step is to determine if the problem is cohesive or adhesive in nature. Simply put, you...